P1-GYRO 3-axis Flight Controller Stabilizer System Gyro for Fixed Flying Wing Airplane
Size: 26*39mm, Weight: about 6g
Operating Voltage: DC 3.5-6V
Operating Current: 20mA
Servo compatibility: 1.52ms analog servo, 1.52ms digital servo
Radio compatibility: PPM, PCM, 2.4GHz
Operating Temperature: -30~70centigrade
Support 3 modes, AVCS, Gyro Off and Normal mode and 3 types of airplane.
Excellently optimized for 3D flight.
Independent gyro gain adjust for aileron, elevator and rudder.
Compact size, light, could be installed on small aircraft.
1. Signal Input
AILE IN: Signal input for Aileron
ELE: Signal input for Elevator
RUD: Signal input for Rudder
SW: Switch for Lock Mode
2. Signal Output
AILE OUT: Signal output for Aileron
ELEV OUT: Signal output for Elevator
RUDD OUT: Signal output for Rudder
3. Gyro Gain Adjustment
AIL: Gain Adjustment for Aileron
ELE: Gain Adjustment for Elevator
RUD: Gain Adjustment for Rudder
The product increases switch control mode and AVCS. AVCS uses angle vector control algorithm to timely test the angle of airplane moving around the three motion axes. Make the aircraft have the ability to keep a moment posture, so we called it AVCS.
Compared with normal stability mode, the AVCS not only increases the flying stability, but also realizes movementts of autonomously crane and side flying without artificial control.
² P1-GYRO adds a switch channel to use in switching mode of flying. You can use a three-stage switch to randomly change among the normal stability mode, AVCS and gyro shutting. Experience completely different pleasure of flying.
Flight Controller can increase flying performance and controllability. Meanwhile, it can counteract various external factors, such as stall and bad appearance-designed aircrafts, the wind and airflow etc. The flight controller will automatically counteract these negative factors.
The high-precision gyro can counteract the unstable airflow to make airplane flying more stably even in the wind of a certain degree. And increase your control feeling to airplane.
For the first use, please refer to the manual to install and debug.
For the first flying, please adjust the sensitivity feel to the minimum. And increased by the range of 5% per time to adjust flying.
Do not set the factory settings to the standard. Please set according to your airplane and power allocation.
1. Adjust the trim on your transmitter with gyro off; make sure your plane can fly straight and level.
2. After the initialization, quickly flip the flight mode switch more than twice within 1 second so that the gyro could relearn new center position.