BETAFPV ExpressLRS ELRS Recovery Dongle for ELRS Lite/Nano/Mirco Receiver BT-Dongle
ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Reciever, ELRS Nano Receiver, ELRS Mirco Receiver, and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flash firmware by UART.
Unbrick and recover the ELRS receiver when having a failed update such as the missing bootloader.
Soldering Free! It features spring probe pins for more convenient use. Connecting it with the ELRS receiver directly does not need to solder.
ExpressLRS Recovery Dongle FTDI USB to TTL module is covered by the case and is more durable and portable compared with the naked board version on the market.
Support many computer systems in the market like Windows, MAC, and Linux. This module uses a Type-C USB port for connecting the computer.
USB Interface: Type-C USB male connector
Operating Voltage: 5V.
Logic Voltage: 5V
3.3V power supply output current: 400mA
Pins output method: 2*4P-2.54mm pin header
Serial baud rate: Up to 921600bps.
Support USB1.1, USB2.0
USB to Serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, win10 / 11 32bits, 64bits, Linux, MAC
Recommend Receiver (Not Included)
- ELRS Lite Receiver
- ELRS Nano Receiver
- ELRS Micro Receiver
- Other ELRS receivers with ESP32&ESP8XX chip.
Note: The package does not include the Type-C USB cable. Please make sure you have available one.
1 x ExpressLRS Recovery Dongle
1 x 4 Pin Cable
1 x Probe Converter Board