BetaFPV HX100 100mm FPV 2-3S Caddx EOSV2 F4 AIO 12A 25-200mW VTX BNF – FlySky Receiver HX100-FL

BULLET POINT

• HX100, a 100mm small-size Toothpick carbon fiber drone, also the first carbon fiber drone of BETAFPV, small but contains much power, enable you to enjoy the indoor fun and explore the outdoor excitement.
• Comes with F4 2-4S AIO 12A FC, possesses high performance STM32F411CEU processor and tuned Betaflight MATEKF411 (MK41), provides much more power on 3S.
• With durable and light enough carbon fiber frame. A total weight of 43.7g gives pilots a good balance of weight and nice punch on 3S battery, which leads to awesome flight performance.
• Whole drone no soldering or tinkering necessary. Customized light 1103 8000KV motors with strengthened cable connectors. It is more thicker which will not easy to break off. Just plug and play. 
• Two sets of props for you to choose, bring you different flight experience. Highly suggest using 48mm 4-blade props with 300mAh 3S battery and 65mm 2-blade props with 300mAh 2S battery, switchable and affordable. 

SPECIFICATION

• Weight: 45.8g (without battery)
• FC&ESC：F4 2-4S AIO 12A FC
• Motors: 1103 8000KV with connector
• Props: 65mm 2-blades props(1.5mm shaft hole) / 48mm 4-blades props(1.5mm shaft hole)
• Camera: Caddx EOSV2 
• VTX: A01 25-200mW 5.8G VTX 
• Frame: HX100 carbon fober frame
• Canopy: Canopy for HX100
• Receiver : Flysky Receiver
• Battery:300mAh 3S Battery / 300mAh 2S Battery (NOT included)
• Flight time: Almost 2mins

FC

• CPU: STM32F411CEU6 (100MHZ )
• Six-Axis: MPU6000 (SPI connection)
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: Betaflight MATEKF411 (MK41)
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2.
• Support programmable LED like WS2812 etc
• Built-in current sensor Weight: 5.6g

ESC

• Support BLheli/BLHELI_S suite Pass-through ready
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, 300, 600
• Input voltage: 2S-4S Lipo
• Continue current: 12A
• Peak current: 13A
• Firmware: BLHELI_S
• Processor: SILABS EFM8BB21F16G
• Motor Connectors: 1.25mm header pins connector
• Factory firmware: G-H-30-16.7

Caddx EOSV2 Camera and A01 VTX

Caddx EOSV2 micro FPV camera is perfectly suitable for Beta85X, Beta75X and Beta75 Pro 2, which has high quality video and low RF interference.

Besides that, the newest A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25-200mW. SmartAudio is available for VTX remote control in default.

• Output power: 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
• TV System: NTSC
• Image Sensor:1/3″ CMOS
• Horizontal Resolution: 1200TVL
• Lens: 2.1mm FOV 160°

PACKAGE INCLUDES:

HX100 100mm FPV Quad (NOT included battery)

48mm 4-Blade Props (4pcs)

65mm 2-Blade Props (4pcs)