Diatone Roma L3 Micro LR 146mm 4S Mamba F411 AIO FC 25A 8BIT ESC With Runcam Nano2 FPV Camera PNP – RomaL3-P4
Specification:
Item name: Roma L3 LR FPV Racing Drone PNP Version
Frame Wheelbase:146mm
Camera: Runcam Nano 2
Antenna: MAMBA Ultras
VTX: MAMBA TX400 400MW/Ultra Tiny VTX
FC: MAMBA F411 AIO
ESC: MAMBA 25A 8BIT
Motor: MAMBA 1206 3600KV
Propeller: HQprop T3×2.5×3 / T3×1.8×3
Weight(without battery): 110g
Roma F3 LR Frame Specification :
Wheelbase :147mm
Weight :43g
Prop Siza :3inch
FC Mounting: 20×20/26.5×26.5mm(M2)
Motor Mounting:9mm/12mm
Camera Spacing:20mm
Top Plate:1.5mm
Medium Plate:1.5mm
Bottom Plate:1.5mm
Arm :3mm
Rated Volitage(Recommendation):3S~4S
bai Aluminum alloy:7075
carbon fiber: T300 3K
F411AIO FC Specificaiton:
-STM32F411CEU6
-Input voltage 2-4S Lipo
-Gyro: MPU6000
-2x UART ports
-OSD inbuilt
-BEC 5V 1.5 A
-Product Size:32mm x 32mm
-Mounting holes: 25.5-26mm*25.5-26mm mm M2
-Weight: 7 g
-Continue Current: 25A×4
-Burst Current: 30A (10S)
-Soft : PWM, Oneshot125, Multishot, Dshot150, 300, 600, etc.
FIRMWARE TARGET : MAMBA F411 (LEGACY)
Mamba TX400 Specification :
- Model: TX400
- Item: FPV Video Transtter
- Working Voltage: 5V
- Working Current: 600mA (5V/400mw)
- Working Temperature: 97 ℃
- Video Input Impedance: 75Ω
- Size: 36×36 × 5.5mm(1-2)
- Antenna Connector: IPEX
- Video Format: NTSC / PAL
- Protocol: IRC
- Output Power: 25mW/ 200mW/ 400mW
- Supply: 30.5*30.5(M3-M2) Adaptor
- Pigtail Antenna
Rucam Nano 2 Specification:
Item name: Runcam Nano 2
Image Sensor: 1/3" CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm(M8) FOV 155°
Signal System: PAL
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current : 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 3.2g
Dimensions: L14mm*W14mm*H16mm
MAMBA 1206 3600KV Specification:
Overall Dimension:Φ17×13.4mm
prop mounting shaft diameter:1.5mm
Installation hole position:9×9mm,M2
Prop: 2inch~3inch
Bearing:5*2*2.5
Shaft Diameter:2mm
Lead Wire Size:24AWG×150mm
Configuration:9N12P
Magnet Wire: 240℃ Enameled Wire
Stator Diamter:12mm
Stator Height:6mm
Rated Voltage:3~4S (12.6V~16.8V)
Peak Current: 10A
ldle Current:6V/0.4A
Maximum Power: 160W
Internal Resistance:236Ω
Recommend Lipo (Not Included):
650mah-850 mah 4S
Package Included:
1 x Roma L3 LR FPV Racing Drone PNP Version
4 x HQ HQ T3×2.5×3 Prop
4 x HQ HQ T3×1.8×3 Prop
1 x GPS Top Lipo Strap Mount :22×20mm
3 x Battery Strap
1 x Univeral Adjustable Gopro Mount Set
1 x Antenna Protective Tube + Caps
5 x Cable Tie
1 x M2 Screws Pack
1 x 20mm PC isolation Sheet
1 x 30.5mm PC isolation Sheet
Reviews
There are no reviews yet.