iFlight 20x20mm BLITZ Mini F7 V1.1 Flight Controller & E55 55A 2-6S 4-IN-1 BLHeli32 ESC MX1647
Changelog:
-27-5-22 : Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000.
FC // BLITZ Mini F7 V1.1 Flight Controller
Top Features:
– BlackBox: 16MB
– DJI Air Unit Plug-and-Play. No need to solder tiny wires.
– BAT, +5V, 3.3, Start indicator
Specifications:
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456
Flash: 16MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Dimensions: 30.5×27 mm
Weight: 5g
Wiring suggestion:
– UART 1 for VTX HD / Analog
– UART 2 for a Receiver
– UART 3/4/5 for GPS or other sensors that require a serial port
– UART 6 for ESC Telemetry
Tips
1. F722 MCU has an inner inverter.
2. SBUS、CRSF、ELRS、IBUS、DSM ETC… can be connected to any unused UART_RX，we suggest you connect to Uart_RX2
3. Frsky SmartPort，Tramp & Smartaudio can be connected to any unused UART_TX，we suggest you connect to Uart_TX1
4. F.port can be connected to any unused UART_TX，we suggest you connect to Uart_TX2
Included Connectors (Plug-and-Play wire harness):
– 1x SH1.0 – 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1/5V/G/VI）
– 1x SH1.0 – 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
– 1x SH1.0 – 6pin connector for any Receiver or DJI（3V3/R2i/5V/G/R2/T2）
– 1x SH1.0 – 4Pin connector GPS (T4/R4/G/5V)
– 1x SH1.0 – 4Pin connector LED & Beeper (BUZ/LED/G/5V)
ESC // BLITZ Mini E55 4-IN-1 2-6S ESC
Specification:
– Dimension: 35*42mm
– Mounting Holes: 20*20mm/Φ4mm
– Weight: 11.3g
– Supports 2-6S lipo input
– MCU：G071
– Constant: 55 Amps
– Burst: 60 Amps
– Current sensor: Yes
– BEC: No
– Current rate: 100
– Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
– Firmware: BLHeli 32
– Target: IFLIGHT_BLITZ_G1
Package included (Optional) :
FC
1 x BLITZ Mini F7 V1.1 Flight Controller
1 set of FC connectors (as above)
1 set silicon grommets
OR
ESC
1 x BLITZ Mini E55 4-IN-1 2-6S ESC
1 x Power cables & ESC signal wires
OR
FC + ESC
1 x BLITZ Mini F7 V1.1 Flight Controller
1 set of FC connectors (as above)
1 set silicon grommets
1 x BLITZ Mini E55 4-IN-1 2-6S ESC
1 x Power cables & ESC signal wires
Reviews
There are no reviews yet.