CYS-S0005 5g Analog Plastic Gear Servo 1pc
Specifications :
| type | Analog |
|---|---|
| Weight | 5g |
| Size | 21.5*11.8*20.9mm |
| Control System | (+)Pulse Width Control 1500usec Neutral |
| Operating Voltage | 4.8~6.0Volts |
| Operating Temperature Range | (-)10 to +50 degree C |
| Operating Speed (4.8V) | 0.14sec/60° at no load |
| Operating Speed (6.0V) | 0.12sec/60° at no load |
| Stall Torque (4.8V) | 0.8kg.cm |
| Stall Torque (6.0V) | 1.0kg.cm |
| Operating Angle | 45deg.one side pulse traveling 500 usec |
| Direction | Anticlockwise/Pulse Traveling 1000~2000usec |
| Current Drain (4.8V) | 10mA/idle and 120mA no load operating |
| Current Drain (6.0V) | 10mA/idle and 140mA no load operating |
| Stall Current | 0.39A/0.46A |
| Dead Band Width | 5usec |
| Motor Type | Coreless motor |
| Horn gear spline | 24T |
| Gear Type | Plastic |
| Connector Wire Length | 180mm |
| Wire info | Brown/Black = Negative |
| Red = Positive | |
| Orange/White = Signal |
Important Notes:
| Specify the connector type when you purchase the servo. |
| Refer to the figure when installing the servo accessories. |
| For engine powered airplanes and boats, rubber must be used to reduce vibration. |
| Please choose correct model for your application. |
| Torque over-loaded will damage the servo's mechanism-. |
| Keep the servo clean and away from dust, corrosive gas and humid air. |
Package included:
1x CYS-S0005 5g Analog Plastic Gear Servo 1pc
Reviews
There are no reviews yet.