CYS-S0008 8g Micro Plastic Gear servo (1 pc)
Spwcifications :
| Type |
Analog |
| Weight |
8g |
| Size |
22.8*11.6*23.6mm |
| Control System |
(+)Pulse Width Control 1500usec Neutral |
| Operating Voltage |
4.8~6.0Volts |
| Operating Temperature Range |
(-)10 to +50 degree C |
| Operating Speed (4.8V) |
0.14sec/60° at no load |
| Operating Speed (6.0V) |
0.12sec/60° at no load |
| Stall Torque (4.8V) |
1.0kg.cm |
| Stall Torque (6.0V) |
1.1kg.cm |
| Operating Angle |
45deg.one side pulse traveling 500 usec |
| Direction |
Anticlockwise/Pulse Traveling 1000~2000usec |
| Current Drain (4.8V) |
10mA/idle and 120mA no load operating |
| Current Drain (6.0V) |
10mA/idle and 140mA no load operating |
| Stall Current |
0.39A/0.46A |
| Dead Band Width |
5usec |
| Motor Type |
Coreless motor |
| Horn gear spline |
24T |
| Gear Type |
Plastic |
| Connector Wire Length |
180mm |
| Wire info |
Brown/Black = Negative |
| Red = Positive |
| Orange/White = Signal |
|
Important Notes:
| Specify the connector type when you purchase the servo. |
| Refer to the figure when installing the servo accessories. |
| For engine powered airplanes and boats, rubber must be used to reduce vibration. |
| Please choose correct model for your application. |
| Torque over-loaded will damage the servo's mechanism-. |
| Keep the servo clean and away from dust, corrosive gas and humid air. |
Package included:
1 x CYS-S0008 8g Micro Plastic Gear servo (1 pc)
Reviews
There are no reviews yet.