iFlight 30.5×30.5mm BLITZ ATF435 Flight Controller & E55S 55A 2-6S 4In1 ESC for Nazgul XL5 DC5 ECO MX5720

iFlight 30.5×30.5mm BLITZ ATF435 Flight Controller & E55S 55A 2-6S 4In1 ESC for Nazgul XL5 DC5 ECO MX5720

Changelog
November 6, 2023: The flight control Gyro was changed from BMI270 to ICM42688.

BLITZ ATF435 FC

Specifications
MCU: AT32F435RGT7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLITZ_ATF435
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
BEC: 5V 2.5A / 9V 2A

Wiring Suggestion (Flight Controller)
UART 1 for VTX HD / Analog
UART 2 for a Receiver
UART 3/4/5 for GPS or other sensors that require a serial port
UART 6 for ESC Telemet

ESC // BLITZ E55S 4-IN-1 ESC

Specifications
Mounting Holes: 30.5*30.5mm/Φ4mm
Weight: 14.7g
Supports 2-6S lipo input
MCU: BB21
Constant: 55 Amps 
Burst: 65 Amps
Current sensor: Yes
BEC: No
Current rate: 200
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)/Q-H-25 – Bluejay, 0.16, 24kHz

Package included (Optional) :

FC 
1 x BLITZ ATF435 Flight Controller
1 x Wire harness for ATF435 Flight controller
4 x silicon grommets

OR

ESC
1 x BLITZ E55S 4-IN-1 2-6S ESC 
1 x  Power cables & ESC signal wires

OR

FC + ESC
1 x BLITZ ATF435 Flight Controller
1 x Wire harness for ATF435 Flight controller
4 x silicon grommets
1 x BLITZ E55S 4-IN-1 2-6S ESC 
1 x  Power cables & ESC signal wires