iFlight Nazgul Evoque F5X Squashed X Analog 4S/6S 5 Inch FPV Racing Drone With RaceCam R1 Mini Camera F5X

Please Take Note : 

iFlight Nazgul Evoque F5X / F5D 4S/6S Analog Version motor is using XING-E Pro 2207, NOT as the product picture shown as advertised XING2 Black color motor.  iFlight Nazgul Evoque F5X / F5D 4S/6S HD Version motor is using XING2 Black 2207.

Spec :
– Total Dimensions: 166*139mm (body dimension)
– Geometry: Squashed-X 
– XING-E Pro 2207 2750kv (4S)/1800kv (6S)
– Nazgul F5 propellers
– Weight: 392.6g (without battery and GoPro mount)

FC // SucceX-E Mini F7 (4S)
– MCU: STM32F22RET6 216 MHz
– Gyro: MPU6000
– Baro: DSP310
– OSD: IFLIGHT OSD （AT7456E）
– BEC: 5V 2.5A
– BlackBox: 16MB
– Uart: 4*UART(UART1、UART2、UART4、UART5)
– UART1 for VTX HD/Analog Telemetry
– UART2 for Receiver
– UART4 for GPS
– UART5 for ESC Telemetry
– 4×Dshot/PWM outputs
– Smartaudio & IRC Tramp VTX protocol supported
– WS2812 led Strip: Yes
– Bepper: Yes
– Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
– Outer Size: 27*27mm / 20*20mm φ3 mounting
– Weight: 4.9g

ESC // SucceX-E Mini 45A (4S)
– Input: 2-6s LiPoly
– Constant: 45 Amps (per channel)
– Burst: 55 Amps (per channel)
– BEC: No
– BlHeli32 telemetry: Yes
– Dimensions: 31×29.5mm
– Mounting Holes: 20*20mm φ3mm with Grommets φ2mm
– Weight: 6.7g (without motor wires)
– Target: iFlight-G071-4IN1

FC // BLITZ MINI F7 V1.1 (6S)
– MCU: STM32 F722
– Gyro: BMI270
– Baro: DPS310
– OSD: IFLIGHT OSD （AT7456E）
– BEC: 5V 2.5A
– BlackBox: 16MB
– Uart: 5*UART(UART1、UART2、UART3、UART4、UART:6)
– UART1 for VTX HD/Analog
– UART2 for  Receiver
– UART3、UART4 for GPS or other sensors that require a serial port
– UART6 for ESC Telemetry
– 1×I2C    
– 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
– 1xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
– 1xSH1.0 6pin connector for Any Receiver or DJI（3V3/R2/5V /G/R2/T2）
– 1xSH1.0 4Pin  connector GPS (T4/R4/G/5V)
– 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
– 4×0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/（BAT Orange）
– Smartaudio&IRCTramp  VTX protocol supported
– WS2812ledStrip：Yes
– Bepper：Yes
– Firmware: IFRC-IFLIGHT_BLITZ_F722
– Outer Size: 30.5*27mm / 20*20mm φ4 mounting
– Weight: 5.0g

ESC // BLITZ Mini E55S 4-IN-1 (6S)
– Dimension: 35*42mm
– Mounting Holes: 20*20mm/Φ4mm
– Weight: 10.4g
– Supports 2-6S lipo input
– MCU：BB21
– Constant: 55 Amps 
– Burst: 60 Amps
– Current sensor: Yes
– BEC: No
– Current rate: 100
– Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
– Target:   QH-50 16.7
– Firmware: Blheli_S

VTX // 5.8GHz SucceX Mini Force 600mW VTX 
– Power: PIT/25/200/400mW/600mW
– Antenna Interface: MMCX
– VTX protocol: IRC Tramp
– Output:  40 channels

Additional Suggested Parts (NOT Included)
Battery 4S 1550mAh
Battery 6S 1300mAh
GoPro Mounts

Package included：
– 1 x Nazgul Evoque F5X Squashed X Analog 4S/6S (Optional)
– 2 sets x Nazgul F5 Props
– 2 sets of Battery pads
– 2 x Battery straps
– 1 Screw bag

Note: Hero camera , TPU print camera mount and battery does not include.