Piso Solder 30W 845 Desoldering Pump Electric Vacuum Desoldering Iron Suction Pump Soldering Repair Removal Tool BG-845

Piso Solder 30W 845 Desoldering Pump Electric Vacuum Desoldering Iron Suction Pump Soldering Repair Removal Tool BG-845

The 854SD electric and heating dual-purpose desoldering device has the characteristics of beautiful appearance, novel structure, easy use, and clean desoldering. It can be used to easily remove the components to be replaced from the circuit board without damaging the components and circuit board. . For replacing integrated circuits, the advantages of multi-pin switches are more prominent. This solder absorber can be used as a general soldering iron and is an essential tool for electronic maintenance personnel.

Precautions:
1. The suction nozzle should be tightened to prevent air leakage, otherwise it will affect the soldering effect.
2. Frequently remove the tin slag in the tin storage cylinder and add a little engine oil to the piston.
3. After each use, push the piston No. 3-4 to remove the residual solder in the straw for next use.
4. This product is equipped with a needle when it leaves the factory. Please use the needle frequently to clean the straw to ensure that the straw is unobstructed.
5. After the solder absorber is powered on, it is strictly prohibited to install and disassemble its electric heating parts.
6. When the solder extractor is used for the first time, it may smoke slightly due to the heating of the electric heating element. This is a normal phenomenon and will disappear naturally after heating.
7. During use, a soldering iron holder with a natural heat dissipation structure must be used.
8. If the power cord is damaged, it must be replaced by a professional.

Specification :
Model :  845 Electric Heating Dual-Purpose Solder Extractor
Tin Cylinder Material：Aluminum Alloy
Suction Nozzle Diameter:1.2mm/1.6mm
Working Voltage: 220V
Power: 30W
Power source: AC220/50Hz
Temperature: 400C +-
Cord Cable Length : 160CM +-
Weight : 185g

Package Includes:
1 X 30W Dual Purpose Solder Suction Device
1 X Holder
1 X Sponge
1 x Sucker Desoldering Pump Tool
1 x Heater
1 x Needle
1 x 1.2mm Nozzle
2 x 1.6mm Nozzle