Happymodel Moblite7 Ultralight 19.5g 1S 75mm Diamond F4 AIO w/ Runcam Nano 3 800TVL Camera – Frsky Moblite7-FR

Description

Happymodel Moblite7 Ultralight 19.5g 1S 75mm Diamond F4 AIO w/ Runcam Nano 3 800TVL Camera – Frsky Moblite7-FR

Notice: 
Because the previous materials of the bag are seriously out of stock, happymodel change it in soft fabric material  (Product picture not yet change).

Aug 02nd, 2021.

Specification:

Brand: Happymodel
Item Name: Moblite7 1S 75mm ultra light brushless whoop
Wheelbase: 75mm
Size: 97x97x25mm
Weight: 19.5g (without battery)
Weight: 36g (with Original 1s 650mah Lipo battery )

Spare parts specifications:
Motor:
Model: EX0802 19000KV (New Unibell Version)
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only

Flight Controller:
(Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 (SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky receiver
Built-in 5V 1A BEC

Onboard 4in1 ESC:
MCU Upgraded to EFM8BB21
Power Supply: 1S LiPo/LiPo HV
Current: 5A continuous, peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory Firmware: O_H_50_REV16_8.HEX
Default Protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:
SPI BUS Receiver Frsky D8 Compatible
Compatible Non EU transmitter D8 model
Channels: 8CH
Failsafe Support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard 5.8G 40CH 25-200mW VTX:
Output Power: 25mw~200mw switchable
Frequency: 40CH
Input Voltage: 3.3V 5.5V
Current Consumption: 300mA (type)
Frequency: 5.8GHz 5bands 40 channels (include Race band)
Smartaudio Ready

Runcam Nano 3 FPV Camera:
Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

Lipo Battery:
Capacity: 650mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g
Connector: PH2.0
Quantity: 2 PCS

Features:
– The lightest 1s 75mm brushless whoop
– Powerful and efficiency
– The lightest 1s AIO 5IN1 F4 flight controller
– New Unibell EX0802 brushless motors
– Low profile Canopy design
– VTX power switchable 25mw~200mw

Package Included:
1 x Happymodel Moblite7 75mm Whoop RC FPV Racing Drone
1 x DiamondF4 FR built-in SPI Frsky Receiver
4 x EX0802 KV19000 Unibell Brushless Motor
1 x HQPROP 40MMX2 Propeller(4cw+4ccw)
1 x Runcam Nano 3 FPV Camera
1 x Built-in 5.8G 40ch 25mw-200mw VTX
2 x 1S 650mah Lipo Battery
1 x 1S USB charger
1 x 75mm Frame (Mobula7 frame)
1 x Propeller Disassemble Tool
1 x Screwdriver
1 x Happymodel Carry Case

Additional information