DarwinFPV CineApe 25 4S 2.5Inch Analog Whoop RTF Ready To Fly+Radiomaster Pocket/Jumper Bumblebee ELRS2.4G DW-CineApe25

DarwinFPV CineApe 25 4S 2.5Inch Analog Whoop RTF Ready To Fly+Radiomaster Pocket/Jumper Bumblebee ELRS2.4G DW-CineApe25

NOTE : Radiomaster Pocket Radio Controller Remote ELRS/Jumper Bumblebee 2.4GHz ELRS Remote both are Mode 2 (Throttle Left Hand)
** Please notify and remarks for us if you need in Mode 1 (Throttle Right)

Description:

Brand: DarwinFPV
Item Name: CineApe 25 4S 112mm 2.5inch Analog 
Receiver: ELRS 2.4G / PNP (Optional)
Camera: Caddx ANT Camera
Weight: 144g (Without Battery)

Frame Kit
Bottom Plate Hole: 28mm x 15mm (3 holes) 20mm x 20mm, 25.5mm x 25.5mm
Top Plate Hole: 20mm x 20mm, 25.5mm x 25.5mm
Carbon Plate Camera Mounting Hole: 19mm
Motor Mounting Hole: 9mm, 12mm
3D Print Camera Hole: 14mm
Top Plate Thickness: 2.5mm
Wheelbase: 112mm
Weight: 66.7g

Motor
1504 3600KV 4S Brushless Motor
KV: 3600KV
Lipo cell: 4S
Weight: 10g
Shaft: 1.5mm
Mounting hole: 9 x 9mm (M2)

F411 F4 FC
Input voltage: 3-6S LiPo
Black box：built-in SD Card slot
BEC output：5V
Firmware upgrade: DARWINF411
Pcb Size：37mm x 37mm
Mounting Holes：20mm x 20mm、30.5mm x 30.5mm

F411 F4 ESC
Continuous Current：30A
Peak Current：35A （10S）
BEC output：Non
Input voltage：3-4S LIPO
Throttle Signal：Dshot600 Oneshot125
Current Sensor： Non
MOS：3 x3
Target：G_H_30
PCB Size：29mm x 31mm
Fixed Hole：20mm x 20mm
Weight：4.9g 

DarwinFPV 600mW VTX
Output Power: 25/200/400/600mW(adjustable)
Frenquency: 5.8GHz 40 Channel
Power Supply Voltage Range: 5V
Weight: 3.5g
Pitch: 28*15mm(length*width)
Size : 34.6*20mm(length*width)
Protocol: SmartAudio
Antenna connector: UFL/IPEX

CADDX ANT Camera
Resolution:1200TVL
mage Sensor: 1/3" CMos Sensor
Input: DC 3.7-18V
TV System: PAL/NTSC

HQProp T63MMX6 Propeller
Shaft :1.9/1.5/1.9mm
Material: Poly Carbonate
Hub Diameter : 10.7mm          
Hub Thickness:4.8mm    
Quantity: 2 pairs
Weight :1.85g

Specifications

Radiomaster Pocket Remote
Physical dimensions: 156.6*65.1*125.3mm (Folded size) /156.6*73.1*154.8mm (Unfold size）
Weight: 288 grams
Operating frequency: 2.400GHz-2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Operational voltage: 6.6-8.4v DC
Operating system: EdgeTX
Control channels: Maximum 16 (Receiver dependent)
Display: 128*64 Monochrome LCD
Battery: 2pcs 18650 batteries (Included)
Charging: Built in USB-C QC3 Charging
Upgradable Firmware: Via USB or the included SD card
Gimbal: Hall-effect
Module bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire / Nano Tracer )

Jumper Bumblebee Remote
Internal RF: ELRS 2.4GHz
Working Voltage: DC6V-8.4V
Compatible Firmware: EdgeTX
Screen: 1.3" OLED 128*64 Resoluton
Gimbals: Hall Sensor Gimbals
Simulator: 3.5mm Standard ppm output or usb-c
Battery: 2pcs 18650 batteries (Included)
SD Card: Built-in chip (officially recommended by EDGETX)
Size: 160*128*68
Weight: 240g (without battery)