GEPRC CineLog35 Performance Analog w/ Caddx Ratel 2 RAD 5.8G 1.6W VTX 142mm 3.5inch 6S CineWhoop GEP35P-AN

GEPRC CineLog35 Performance Analog w/ Caddx Ratel 2 RAD 5.8G 1.6W VTX 142mm 3.5inch 6S CineWhoop GEP35P-AN

Summary
The CineLog35 Performance version is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance.The concept of the Performance version is to maximize Racing performance and achieve perfection with the existing frame size.

We upgraded the power system, using F722-45A AIO with the new SPEEDX2 2105.5 motor, which has stronger power and faster response speed.
Of course, The analog version has also been greatly upgraded.Uses an amazing 1.6W high power RAD VTX,stable signal transmission, strong anti-interference ability, farther signal transmission distance.
The CineLog35 Performance is also equipped with excellent and affordable GEPRC ELRS 2.4G.

This is a FPV quad that combines Cinematic shooting, Freestyle, Racing and Cruising to satisfy your indoor & outdoor flying requirements in various scenes.

Features
1. 3.5-inch integrated propeller guard, hollowed-out weight reduction and noise reduction design, quiet and safe flight,brand new appearance design
2.Equipped with GEPRC F722-45A AIO high-performance FC and integrated BLHeli_S 45A 6S ESC.
3.SPEEDX2 2105.5 motor with DT90-3 propeller, stable power output and smooth flight experience.
4.Reversed-motor design, higher flight efficiency, longer flight endurance, flexible flight attitude.
5.Comes with two 3D printed parts,which can be installed with GoPro cameras or Naked 8,10 Camera, Insta 360 GO2 and Caddx Peanut cameras.
6.Shock-absorbing gimbal design, more stable and clearer shooting, Without jelly any more.
7.The analog version uses RAD high power 1.6W VTX, stable signal transmission, strong anti-interference ability and longer signal transmission distance.

Cruising Flight Time
6S 1550MAH Battery: 5 minutes 30 seconds (with GoPro10 mounted)
6S 1550MAH Battery: 7 minutes 30 seconds (None)

Specifications
Model: CineLog35 Performance Analog
Brand: GEPRC
Frame: GEP-CL35 Performance
Wheelbase:142mm
Top plate: 2.5mm
Bottom plate: 2.0mm
Arm plate: 3.5mm
FC system: GEP-F722-45A AIO
MCU: STM32F722
IMU: 6-Axis
OSD: BetaFlight OSD w/AT7456E chip
ESC: BLheli_S 45A
VTX: RAD 5.8G VTX 1.6W
Camera: Caddx Ratel2
Propeller: HQ DT90-3
Antenna: GEPRC Momoda 5.8g MMCX RHCP 195mm Long Version Antenna
Motor: SPEEDX2 2105.5-2650KV
Weight: 257.9g (CineLog35 Performance Analog 6S PNP)

Receiver: PNP(Without Receiver), TBS Nano RX, ELRS 2.4G (Optional)

Recommend Lipo Battery ( NOT Included) : Battery:LiPo 6S 850mAh-1550mAh
*Recommend GEPRC 1550mAh 22.2v 6S 60C Battery for CineLog35 Performance 6S

Includes
1 x CineLog35 Performance Analog
2 x HQ DT90-3 propellers (pair)
1 x Battery strap M15x200mm
2 x Battery silicone pads
2 x Landing pads
1 x Spare 3D printing parts
1 x Set of screws
1 x Set of screwdriver
1 x CADDX OSD menu board
1 x Antenna fixed tube

*Gopro Camera NOT Included